Filter
Top Products
24 C
HAPTER
2: I
NSTALLING
THE
VCN A
CCESS
C
ONCENTRATOR
3
Connect the Krone connector of the inner wire pair to the new VCN AP
punch-down block, which has been added.
4
Connect another punch-down Krone connector from the VCN AP
punch-down block to the back of the patch panel.
5
Connect an additional punch-down Krone connector from the patch
panel to the PBX punch-down block to carry voice transmissions of the
inner wire pair to the PBX.
6
Repeat step 1
through step 5 for up to 24 telephone lines.
Figure 9
shows the resulting infrastructure.