Acclaim Lighting ACCLAIM USB ONLY INTRAORAL DIGITAL VIDEO CAMERA SYSTEM Camera Accessories User Manual


 
10
Installing the Acclaim System is as simple as making the necessary connections
of the USB Umbilical between a PC loaded with an Air Techniques Authorized
DirectX 9 compliant user-supplied streaming video software application such as
VISIX and the Camera Handpiece. Perform the following procedures to set up the
Acclaim System.
SYSTEM SETUP
Camera Handpiece Connection - Carefully connect the A5520 Camera
Handpiece to the supplied USB Umbilical as follows:
Connector
Key
Camera
Handpiece
Do not use the A5020 Camera Handpiece (blue and white plastic). Only the A5520
Camera Handpiece (metallic) can be used with the USB Only Acclaim System.
Do not twist or turn the cable connectors. The USB Umbilical connector is keyed
and mates straight on with the A5520 Handpiece connector.
CCaammeerraa HHaannddppiieeccee CCoonnnneeccttiioonn
((AA55552200 oonnllyy))
Notes: Authorized Imaging Software, such as VISIX, supplied by the dealer or other
company, must be installed on the computer in order to operate the Acclaim
System.
A Microsoft® Driver Not Signed statement may appear. If it does, click
Continue to proceed with installation.
WDM Driver Installation - Before connecting the Acclaim System to your
computer or attempting to use it for the first time, run the Setup program on the
Acclaim System Drivers and Utilities Disk included with the Acclaim System. The
supplied CD provides the WDM drivers needed to communicate between the
Acclaim System and the associated user-supplied USB streaming video software
application installed on the PC computer system. Normally, this program runs
automatically when the CD is inserted into the drive for the first time. If not, run the
setup program located in the root directory of the CD (typically
DD::\\AAccccllaaiimm.. mmssii
).
The Setup program guides the user through updating the computer library files,
which must be completed before the Acclaim System will operate properly. More
information can be found in the Installation Instructions and Notes file on the
Acclaim System Drivers and Utilities Disk included with the system.
1. Using the gray molded connector
end of the USB Umbilical, align
the connector key with the keyway
of the Handpiece connector.
2. Insert straight into Handpiece
connector until it securely snaps
into place.