Filter
Top Products
14
Whether detaching just the Camera Handpiece from the USB Umbilical and
using with additional Acclaim USB Umbilicals installed on other computers or
bringing the complete system (handpiece and umbilical), the Acclaim System is
easily shared among patient operatories.
Refer to the corresponding illustrations and perform the following when trans-
porting only the Camera Handpiece.
1. Retract collar of quick disconnect connector and simultaneously pull
straight from the Handpiece connector.
2. Release connector quick disconnect collar.
3. Store the USB Umbilical by placing cable slide holder into the Handpiece
Holder.
4. Transport Handpiece to next operatory.
5. Connect Handpiece at new location by aligning the connector key with the
keyway of the mating USB Umbilical connector.
6. Insert straight into Handpiece connector until it securely snaps into place.
When transporting the complete Acclaim System (handpiece and umbilical)
among patient operatories, simply disconnect the the USB connector end of the
USB Umbilical, transport the system and reconnect to the new computer. Make
sure that the computer in the new operatory is using compliant software.
DDeettaacchhiinngg CCaammeerraa HHaannddppiieeccee
Quick Disconnect
Collar
Camera
Handpiece
Quick Disconnect
Connector End
Control Umbilical
Handpiece Holder
Cable Slide Holder
SSttoorreedd UUSSBB UUmmbbiilliiccaall
CCoonnnneeccttiinngg CCaammeerraa HHaannddppiieeccee
Connector Key
Camera Handpiece
CAMERA PORTABILITY
Do not twist or turn the Handpiece Cable connector. The connector is keyed and
mates straight on with Camera Handpiece connector
.