Filter
Top Products
9
Acclaim Camera
Handpiece
A5520
3
2
Keypad Buttons - Each keypad button provides the Acclaim Camera
Handpiece fingertip control over the PC streaming video capture software via the
USB Umbilical. The specific functions performed by the keypad buttons depend
on a software installation that supports the 2-button handpiece. Typical keypad
actions provided below.
NOTE: Simultaneously depressing both keypad buttons for approximately 3 seconds
deactivates the Camera Handpiece LED light source. This is commonly used
when imaging an X-ray on a light box.
(1) Top Keypad Button Sends a Button 1 command to the PC.
While the specific function performed
depends on the setting of the video capture
software application installed on the PC,
this command typically freezes and
unfreezes the image that is displayed on the
computer monitor. (Press to go live. Release
to freeze.)
(2) Bottom Keypad Button Sends a Button 2 command to the PC.
While the specific action depends on the
video capture software installed, it typically
saves the image displayed on the computer
monitor to the computer hard disk.
(3) Handpiece Connector An 8-pin connector socket that accepts
connection of the keyed 8-pin quick
disconnect plug end of the USB
Umbilical.
HANDPIECE KEYPAD BUTTON FUNCTIONS
1