Aiphone LEM-1DL Film Camera User Manual


 
#90111 1109
LEM-1DL Supplement
Pg. 1
The LEM-1DL master station provides communication to and from a door station, and has a separate button
for door release. This supplemental instruction manual addresses many of the additional functions and
modications for the LEM-1DL system, including installation and troubleshooting information.
LEM-1DL Supplemental Instructions
Single Master Station with Door Release
- REFER TO INSTALLATION MANUAL INSIDE LEM-1DL BOX FOR STANDARD
INSTALLATION INFORMATION -
MASTER STATION:
LEM-1DL: 1-call master station with “Normally Open” door release button
DOOR STATIONS:
(Note: Door stations are weather resistant, made for outdoor use)
LE-D: Surface mount, plastic door station (included with LEM-1DLS Set)
LE-DA: Flush mount in 2-gang box, stainless steel cover
LS-NVP/C: Vandal resistant ush mount in 3-gang box, white powder-coat nish
LE-SS: Vandal resistant ush mount sub in 2-gang box, stainless steel
LE-SSR: Vandal resistant, red mushroom button, ush mount in 2-gang box,
stainless steel
LE-SS-1G: Vandal resistant ush mount sub in 1-gang box, stainless steel
OPTIONAL COMPONENTS & ACCESSORIES:
RY-AC/A: External signaling relay (Requires 12VDC power supply)
DAK-2S: Dual master adaptor kit
(1 per 2 master stations. Use 2 DAK-2S for up to 4 total master stations)
SBX-NVP: Surface mount box for LS-NVP/C
SBX-2G: Surface mount box for LE-SS, LE-SSR, LE-DA
SBX-1G-SS: Surface mount box for LE-SS-1G
EL-12S: Door strike (for interior wood frame doors only)
PT-1210N: AC 12V Transformer (used for door strike and for each master station)
PS-1225UL: 12V DC Power Supply, 2.5A, UL Listed
822202: 2 conductor, 22AWG, Shielded wire
(Available in 500’ and 1000’ boxes)
Install two separate runs of this cable, one for the intercom and one for
the door release.
DOOR RELEASE WIRES MUST BE IN A SEPARATELY JACKETED CABLE FROM THE INTERCOM WIRING.
LEM-1DLS Set contains:
1 LEM-1DL, 1 LE-D, 1 PT-1210N.
Door strike not included.
2 cond. shielded for intercom
LEM-1DL
LE-D LE-DA
LS-VNP/C
LE-SS
DAK-2S
(2 component modules per kit)
Separate 2 conductor for door release
If using a non-Aiphone door strike, use separate power
source for door release mechanism.
LE-D
LEM-1DL
PT-1210N
Power
Source
for Strike
!