Filter
Top Products
TO REMOVE / REPLACE BULB
NOTE: Only MR-16 type bulbs should be used with the UL2.
1. Pull out on the Thumb Tabs of the Head Module.
2. Swing Hood open.
3. Remove and replace bulb as necessary.
4. Close Head Module, insuring that it “clicks” closed.
Thumb
Tabs
Hood
TO RE-ATTACH HEAD MODULE
Push Head Module onto base, as shown, until the Head Module engages over screw.
Screw
TO REMOVE HEAD MODULE
1. Push Head Module forward.
2. Lift Head Module
and remove it
from the Base.