Filter
Top Products
More than one piece of paper passes through the printer at a time
Follow these steps:
1 Remove all the paper from the sheet feeder.
2Turn off the printer.
3Turn the printer back on.
4Put the paper back in.
Paper or envelopes feed improperly
If paper tears, gets skewed, or comes through the printer crumpled, it may not
be entering the printer properly. Try the following:
m
Make sure you have loaded the paper correctly, paying special attention to both
paper selectors.
For instructions on loading paper, see “Loading the Sheet Feeder” in
Chapter 2.
m
Do not overload the sheet feeder.
The feeder holds up to 15 envelopes or up to 100 sheets of 20-pound paper.
If you use heavier paper, fewer sheets will fit in the feeder.
m
Do not force paper into the sheet feeder.
74
Chapter 5