AT&T BWX560 Digital Camera User Manual


 
BWX560 Users Manual and Installation Instructions
1
BWX560 Camera Users Manual and
Installation Instructions
Safety Warning
1. Handle the camera with care.
Be careful when handling the camera, do not drop it or subject
it to strong shock or vibration to prevent any damages to it. Do
not disassemble it or place it on an unstable base.
2. Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers because the magnetic fields generated from above devices will distort
the video image.
3. Do not install the camera in the high temperature environment.
Install the camera away from stoves, or other heat generating devices as the high
temperature could cause deformation, discoloration or other damage to the camera.
Install the camera where the temperature range will stay between 0 to 50 (32 to 122).
4. Never face the camera toward the sun.
Never aim the camera at the sun or other extremely bright objects whether it is in use or
not.
5. Cleaning
Do not touch the surface of CCD sensor by hand directly.
Use a soft cloth to remove the dirt from the camera body. Use lens
tissue or a cotton tipped applicator and ethanol to clean the CCD
sensor and the camera lens. When the camera is not in use, put the cover cap on the
lens mount.
Introduction
The new BWX560 series is a solid-state B/W video camera specially designed for high
quality surveillance applications. It incorporates break-through DSP technology that
provides the most reliable and accurate B/W picture in security industry. The camera is
convenient to use with C-mount or CS-mount lenses and has an easy back-focus
adjustment help to achieve installation efficiency.
Main Features :
1/3” B/W CCD pick-up device for more than 560 TV lines of horizontal resolution
Sophisticated DSP (Digital Signal Processing) circuitry design that delivers
excellent picture quality and performance.
Wide range automatic electronic shutter: 1/60(1/50)~1/100,000 sec
Auto line lock with external phase adjustment
Used with either C-mount or CS-mount lenses and easy back-focus adjustment.
System available in EIA or CCIR.