Avenview DVI-VIDEOWALL-9X Camcorder User Manual


 
www.avenview.com
14
1.9.3.2 Settings
Setting for correct COM Port for Serial Control and the Device number for identification.
1.9.3.3 Connect
Makes connection to attached device via RS232 to USB Adapter.
1.9.3.4 Disconnect
Disconnects the attached device.
1.9.3.5 Input Resolution
Here you can set the resolution of Input. It can take up to 10 seconds for new resolution to take effect.
1.9.3.6 Main Source
Choose one of the Input sources from DVI, VGA, CVBS or S-Video
1.9.3.7 Sub Source
Choose one of the Input sources from DVI, VGA, CVBS or S-Video
1.9.3.8 Display Layout Mode
Setting the layout of the main and sub sources in mixed video.
1. Main Full Screen: Only main source is displayed in the mixed video
2. Sub Full Screen: Only sub source is displayed in the mixed video
3. PIP Mode: The main source is displayed as the background, and the sub source is shown has
Picture-in-Picture.
4. Side by Side: The two input sources are displayed side by side
5. Custom Define PAP: User can adjust the layout of the two input sources without any limitations.
Main and Sub sources can be from the same Input.