Filter
Top Products
BenQ DC 5530 User’s Manual
English
Using the DC S30
14
3.1.9 Capture Mode Setup
This menu is for setting the basic setting to be used for photography in Manual and
Auto capture modes. The Manual and Auto mode icons denote whether the setting is
available for that mode or not.
3.1.9.1 Navigating in the Capture Setting Menus
1. Set the mode dial to one of the
available modes.
2. Press the MENU/C button.
The
menu screen is displayed.
3. Press the zoom in and zoom out
buttons to go up and down in
the menus.
4. Press the macro and flash
buttons to select and set the mode
setting.
5. Press the zoom in or zoom out buttons to select another mode. Press the macro
and flash buttons to select and set the mode setting as before.
6. Press MENU/C to exit the menus.
3.1.9.2 Capture Mode
Sets the capture mode at which the image is to be recorded.
Single: 1 shot mode (default)
Continuous: In this mode, photographs are
taken continuously at a maximum speed of 0.5 second
speed interval. The maximum number of photographs
that can be taken continuously is 3 photographs.
Self-timer: enables you to set the timer to take a
shot. When this mode is enabled, the picture will be
taken 10 seconds after the shutter button is pressed.
Note
When you select a setting for a mode, it is set—you don’t need to perform any other
action.
Notes
•
Use self-timer mode when you want to be included in the shot.
• Use a tripod for best results.
XL
1
Shootmode
Shootmode
Setup ModeCapture Mode
X Indicates currently selected mode item
Current Setting
Setting Options
XL
1
Shootmode
Shootmode
1