Canon 0140C001 Digital Camera User Manual


 
52
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Still Images Movies
Face AiAF
Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
When the camera detects movement, frames will follow moving subjects,
within a certain range.
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
If faces are not detected when Servo AF (=
53) is set to [On], the
AF frame is displayed in the center of the screen when you press
the shutter button halfway.
Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in prole, at an angle, or partly hidden
The camera may misinterpret non-human subjects as faces.
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
Follow the steps in “Changing the AF
Frame Mode” (=
51) to choose
[Tracking AF].
[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
Aim the camera so that [ ] is on the
desired subject.
Press the shutter button halfway. [ ]
changes to a blue [
], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(=
53).
3 Shoot.
Press the shutter button all the way down
to shoot.
[Servo AF] (=
53) is set to [On] and cannot be changed.
Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
[AF-Point Zoom] on the [4] tab is not available.
[e] and [u] are not available.
Downloaded From camera-usermanual.com Canon Manuals