Canon 350D XT Digital Camera User Manual


 
Copyright, 2005 ExpoImaging, Inc.
“Canon” and the Canon camera models listed are Trademarks of Canon, Inc.
ExpoDisc White and Warm Balance Filters
Canon Custom WB Procedures
Canon 300D Digital Rebel and Digital Rebel 350D XT
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
3. Aim the camera in the appropriate direction for the given lighting condition and
press the shutter release button. See the ExpoDisc Instruction manual for more
information on where to aim the camera.
4. Push MENU button and select < camera icon > tab.
5. Select CUSTOM WB using < down arrow >, then push the SET button.
6. Push SET button again to select the ExpoDisc gray frame just taken.
7. Push the MENU button to exit menu.
8. Push and hold the WB button < down arrow > on the back of the camera
while rotating main dial on top of the camera to select the custom WB icon in the
control panel.
9. Remove the ExpoDisc, return camera to auto focus mode (if desired), and start
shooting.
Canon 10D
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
3. Aim the camera in the appropriate direction for the given lighting condition and
press the shutter release button. See the ExpoDisc Instruction manual for more
information on where to aim the camera.
4. Push the MENU button.
5. Scroll down to CUSTOM WB in the menu using the thumb dial, then push the
SET button in the center of the thumb dial.
6. Push the SET button again to select the ExpoDisc gray frame just taken.
7. Push the MENU button to exit menu.
8. Push and hold the AF-WB button on top of the camera while rotating thumb
dial to select the custom WB icon in the control panel.
9. Remove the ExpoDisc, return camera to auto focus mode (if desired), and start
shooting.
Canon 20D
1. Install the ExpoDisc and set the camera to Manual Focus Mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.