Filter
Top Products
25
6
Set the master unit’s flash mode
to <a>.
The slave unit(s) will also be
automatically set to <a>.
7
Check that the flash is ready.
When the slave unit is ready to fire,
the AF-assist beam will blink once
each second.
8
Check the flash operation.
Press the master unit’s test firing
button.
X The slave unit will fire. If the flash
does not fire, adjust the slave unit’s
angle toward the master unit and
distance from the master unit.
9
Set the camera and shoot.
Set the camera in the same way as
with normal flash shooting.
80°
8m (26.2ft.) 12m (39.4ft.)
Indoors
Outdoors
Sample wireless flash setup
Master
unit
Slave A
Slave B
A52_E.book Page 25 Friday, June 10, 2005 4:40 PM