Filter
Top Products
39
E
Using the Full
Range of Features
Setting the Date and Time
The date and/or time display forms part of the data code. You can choose to display or hide it during
playback (see p. 65).
Set the date and time display when you first start using your camera. Charge the backup battery for a full
day (approx. 24 hours) before you begin (see p. 84).
• Before you start setting the date and time, select your home time zone from the menu.
• If you are on daylight saving time now, you should set the camera to daylight saving time. You can do
this at the same time you select your home time zone.
• After you set the date and time, the date/time and home time zone will be displayed for about four
seconds each time you turn the power on.
• The camera automatically accounts for the number of days in a month and leap year.
Setting the time zone/daylight saving time
1. Set the camera to record pause mode.
• PAUSE appears in the display.
2. Open the menu and select T.ZONE/DST.
3. Press the menu dial in.
• The time zone display appears on the screen.
• Your camcorder’s time zone is factory-preset to New York. If you are at another time zone, select
your time zone first and daylight saving time (DST) setting if necessary.
4. Move up or down the list of time zones by turning the menu dial. Press the menu dial in
to select the option that represents your time zone.
• If you are now in daylight saving time, select the time zone with the daylight saving time mark C
next to the area.
5. Press the MENU button.
T.ZONE/DST••N.Y.
(see p. 34)
MENU