Filter
Top Products
Connecting a Power Source and the Camera to
the Printer
Connect the camera to the printer using the cable (included with the camera)
and turn the printer's power on.
For more detailed camera connection instructions, refer to your Camera User
Guide or Direct Print User Guide.
Camera*
15 cm
(6
in.) at the
front and back of the
devices and 10 cm
(4
in.) on both sides or
more of open space
To
DIGITAL terminal
.j~;
~
•
To
DC IN terminal
~~
I~\~~""""
.•
-,~':.>i
(y/-
Interface cable
~1I11i~
••
•
••
·.·.·.·.·i·
..
i.··.··>······
included with
To
power
the camera outlet
~------,
Camera's Compact Power
Adapter (sold separately or
included with the camera)
• Please use the camera's
compact power adapter or a
~1~~4~
3 fully charged battery pack (or
-~
fl'
~
charged batteries).
2
~"
.•
Compact power
To
power outlet
adapter
* Canon cameras compatible with CP400, and non-Canon cameras compatible with
PictBridge can also
be
connected.
The numbered steps
in
the following instructions refer to the numbers
in
the above
illustration.
Place the printer on a flat area.
• Be sure to leave about 15 cm
(6
in.) of clearance around the paper-handling slot
(at the rear)
so
that paper has sufficient room to jut out from the slot during
printing.
Connect the supplied power cord to the supplied Compact
Power Adapter CA-CP200.
Insert the plug
in
a power outlet.
29