Filter
Top Products
10
Getting Ready Printing AppendicesOverview
Troubleshooting Tasks and Index
NextBack
Return to Cover Page
Paper Cassette Preparations
The following procedures instruct you how to set paper in the
cassette and install it in the printer.
1 Confirm that you have the correct size of paper cassette.
Prepare the correct size of paper cassette for the sheets you are
using.
2 Open the lid of the paper cassette.
Use the following procedures to open paper cassettes with two lids.
3 After lightly fanning the paper, set it in the cassette with
the shiny side up.
Remove the protective sheet from the paper. Be careful not to touch
the shiny side of the paper.
4 Close the lid.
As the illustration shows, the lid should overhang the end slightly.
On cassettes with two lids, close only the inner lid before inserting
the cassette fully into the slot until it clicks into place.
Setting Paper in the Paper Cassette
Size Notation
Push back a little
before lifting upward.
Outer Lid Inner Lid
Push back a
little before
lifting upward.
WIDE
POSTCARD SIZE
CARD SIZE
Orient the address
portion on the
postcards towards
the back of the
paper cassette.
Align the paper
beneath the tabs.
L Size
Shiny Side
Align the paper
beneath the tabs.