Filter
Top Products
25
Before You Start
1
Inserting and Removing the Battery Pack
● The number of shots may be less than indicated in some cases, due to
differences in operating conditions.
● The number of shots is reduced by frequent use of the LCD monitor.
● Holding the shutter button halfway down for long periods to use the AF function
without taking a shot can reduce the number of shots.
● In low temperature conditions (0°C/32°F), the number of shots may be less than
indicated.
● Regarding the battery life (number of shots) with Battery Grip BG-ED3
(optional), refer to the BG-ED3’s instructions.
Removing the Battery Pack
1
Open the battery cover.
● Slide the lever in the direction shown by the
arrow in the diagram, and open the cover
as shown.
2
Remove the battery pack.
● Slide the battery lock lever in the direction
shown by the arrow, and remove the
battery.
3
Close the battery cover.
● Press the cover closed until it clicks shut.
● The above figures were obtained under Canon test conditions (fully charged battery, EF
50mm f/1.4 USM lens, Review function [On], Review Time [2 sec.], Quality [Large
]).
Battery Life
Temperature
Shooting conditions
No flash use 50% flash use
Normal (20°C/68°F) Approx. 620 Approx. 490
Low (0°C/32°F) Approx. 480 Approx. 400