Filter
Top Products
S Selecting the AF Area and AF PointK
106
You can manually select the AF point or zone. If 19-point automatic
selection AF + AI Servo AF has been set, you can select any position
where AI Servo AF is to start.
1
Press the <S> or <B> button
(9).
The AF points will be displayed in the
viewfinder.
In the Zone AF mode, the selected
zone will be displayed.
2
Select an AF point.
You can select an AF point by shifting
horizontally with the <6> dial or
vertically with the <6> dial while
holding down the <g> button. If
you press <0>, the center AF point
(or center zone) will be selected.
In the Zone AF mode, turning the
<6> dial will change the zone in a
looping sequence.
You can also select an AF point or
zone by shifting horizontally with the
<Y> <Z> keys or vertically with the
<W> <X> keys.
Selecting the AF Point Manually
<g> + <6>
<6>
When you press the <S> or <B> button, the viewfinder displays the
following:
• 19-point automatic selection AF and Zone AF (manual selection of zone):
M AF
• 1 pt AF (Manual selection): SEL N (Center)/SEL AF (Off center)