Filter
Top Products
w Printing
326
In step 4 on page 324, select the printing
effect. When the <ze> icon is
displayed brightly, you can press the
<B> button. You can then adjust the
printing effects. What can be adjusted or
what is displayed will depend on the
selection made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram’s distribution and adjust the
image’s brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the <
h>. Press the <Y> <Z> keys to freely
adjust the shadow level (0-127) or highlight level (128-255).
kBrightener
Effective in backlit conditions where the subject’s face looks dark.
When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eyes. When [On]
is set, the red eye will be corrected for printing.
e Adjusting Printing Effects
The [kBrightener] and [Red-eye corr.] effects will not be reflected on
the screen.
When [Detail set.] is selected, you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], press the <W> <X> or <Y> <Z> keys. B is for blue, A for
amber, M for magenta, G for green. The image’s color balance will be
adjusted towards the color in the direction of move.
If you select [Clear all], all the printing effect settings will be reverted to
their defaults.