Filter
Top Products
375
Troubleshooting Guide
If you use a flash unit other than an EX-series Speedlite, the flash will
always be fired at full output (p.172).
Under [z1: Flash control], if [Flash metering mode] in [External
flash C.Fn setting] is set to [TTL flash metering] (autoflash), the
flash will always fire at full output (p.178).
If flash exposure compensation is set with the external Speedlite, flash
exposure compensation cannot be set with the camera. When the
external Speedlite’s flash exposure compensation is canceled (set to
0), flash exposure compensation can be set with the camera.
Under [z1: Flash control], set [Flash sync. speed in Av mode] to
[Auto] (p.174).
A small noise may be heard when the camera’s internal mechanism
moves slightly.
If you use flash, the shutter will make two sounds each time you shoot
(p.193).
The external flash always fires at full output.
Flash exposure compensation cannot be set for the
external Speedlite.
High-speed sync cannot be set in the <f> mode.
The camera makes a small noise when it is shaken.
The shutter makes two shooting sounds during
Live View shooting.