Filter
Top Products
377
Troubleshooting Guide
Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent lighting, LED lighting, or other light sources
during movie shooting. Also, changes in the exposure (brightness) or
color tone may be recorded. In the <a> mode, a slow shutter speed
may reduce the problem.
If the camera is connected to a computer, printer, GPS receiver, TV
set, or other device with a cable, Wi-Fi cannot be set ([51: Wi-Fi/NFC]
will be grayed out). Disconnect the cable before changing any settings.
For details, refer to the Wi-Fi/NFC Function Instruction Manual.
Check if your finger is blocking the speaker (p.26).
In Basic Zone modes and in movie shooting mode, certain tabs and
menu options are not displayed. Set the shooting mode to a Creative
Zone mode (p.53).
The image flickers or horizontal stripes appear during
movie shooting.
Wi-Fi
Wi-Fi cannot be set.
Operation Problems
During touch screen operations, the beeper suddenly
sounds softer.
Display Problems
The menu screen shows fewer tabs and options.