Filter
Top Products
381
Troubleshooting Guide
If you selected [Clean nowf], the shutter will make a noise, but no
picture is taken (p.271).
If you repeatedly turn the power switch <1> / <2> at a short
interval, the <f> icon may not be displayed (p.40).
Contents displayed on the screen vary depending on the printer. This
instruction manual lists all the printing effects available (p.324).
If any of the following shooting modes or functions is set, the camera
cannot be connected to a printer. Cancel all the relevant settings, then
reconnect the camera to the printer with an interface cable.
•<F> or <G> in <8> mode
• Multi Shot Noise Reduction
•[51: Wi-Fi/NFC] set to [Enable]
Install the EOS software (EOS DIGITAL Solution Disk CD-ROM) on
the computer (p.404).
If [51: Wi-Fi/NFC] is set to [Enable], the camera cannot be connected
to a computer. Set [Wi-Fi/NFC] to [Disable], then reconnect the
camera to a computer with an interface cable.
Sensor Cleaning Problems
The shutter makes a noise during sensor cleaning.
Automatic sensor cleaning does not work.
Printing-Related Problems
There are fewer printing effects than listed in
the instruction manual.
Direct printing does not work.
Computer Connection Problems
I cannot download images to a computer.