Filter
Top Products
224
3 Custom Function Settings
C.Fn III -11 Switch to registered AF point
You can instantly switch to the registered AF point with <9> or the <w>
button while the metering timer is active. The AF will operate when the
switch is made.
0: Disable
1: Switch with <9>
By pressing <9>, you can switch to the registered AF point. Press it
again to switch to the previous AF point.
2: Only while <A> is pressed
You can switch to the registered AF point only while you hold down the
<A> button. When you release the <A> button, the camera will return
to the original AF point.
C.Fn III -12 AF point auto selection
For AF point selection, you can enable or disable automatic selection.
The setting before the slash (/) applies to the <5> dial’s function while the
metering timer is active with C.Fn IV -3-1/3 set. And the setting after the
slash applies to the <6> dial’s function when the <S> button is pressed.
0: 5direct:disable/6:enable
When metering is active, the <5> dial cannot select automatic
selection. You can select automatic selection with <6>.
1: 5direct:disable/6:disable
Automatic selection cannot be selected.
2: 5direct:enable/6:enable
When metering is active, the <5> dial can select automatic selection.
You can select automatic selection with <6>.
Registering the AF point
You can register an AF point you use frequently.
1. Select the AF point to be registered. (p.97)
2. While holding down the <S> button, press the <Z> button.
• HP: Automatic selection, SEL [ ] : Center AF point,
SEL HP : Off-center AF point
If you change the C.Fn III -10 setting, the registered AF point will be
canceled. The camera will switch to the center AF point.
You cannot register multiple AF points.
[ ]
--
--
COPY