Filter
Top Products
97
Select one of the 45 AF points to autofocus. Manual selection enables
you to select one of the 45 AF points. And automatic selection has
the camera automatically select one of the 45 AF points.
1
Press the <S> button. (9)
X The current AF point will be displayed
in the viewfinder.
2
Select the AF point.
Use <9> or turn the <6> or <5>
dial.
The AF point selection will change in
the direction you tilt the <9>.
Pressing <9> straight down selects
the center AF point. Pressing it
straight down again sets it to
automatic AF point selection.
If all the peripheral AF points light up,
automatic AF point selection will take
effect.
S Selecting the AF Point
Selecting with the Multi-controller
When the EF70-200mm f/2.8L USM is used with an Extender, use the
center AF point only. The other AF points may cause a focusing error.
When switching to a vertical AF point, two AF points might light up. In such a
case, shooting will proceed with the two AF points automatically selected.
With two AF points selected, when you switch to a left or right AF point, only
one AF point will be selected.
Automatic selection: AF
Manual selection : SEL (Center)
SEL AF (Off center)
COPY