Filter
Top Products
Commonly Used Shooting Functions
65
See Functions Available in Each Shooting Mode (p. 208).
*
Cannot be set in mode.
Using the Flash
Shooting Mode
1
Raise the flash manually.
2
Press the button.
1. Use the or button to change
the flash mode.
: [Auto]
: [On]
3
When you are not using the
flash, lower the flash until it
closes.
• (flash off) appears in the LCD
monitor.
You are recommended to shoot with the camera attached to a
tripod or other device if the camera shake warning icon
appears.
When the flash recharging begins after shooting, the indicator
blinks orange and the LCD monitor turns off. When recharging
ends, the indicator turns off and the LCD monitor turns on. The
time required for flash recharging will change depending on
usage conditions and remaining battery power.