Canon VC-C50i Security Camera User Manual


 
Before You Use the Product
14
Using the Wide-angle Converter
The optional Wide-angle Converter WL-37 can be used to provide wide-angle shots (approx.
0.74× the normal focal distance).
Mount the wide-angle converter correctly so that it is level and fitted securely onto the
camera. When mounted correctly, the wide-angle converter should turn roughly 3 times before
stopping.
Connecting the Components
Wide-angle Converter
The Wide-angle Converter WL-37 cannot be used on the VC-C50iR. If the converter
is used on the VC-C50iR, the mount will gradually loosen and the converter will fall off
the camera.
a
WARNING
The camera may not operate correctly if a wide-angle converter other than
the WL-37 is used.
If you use the optional Wide-angle Converter WL-37, set the zoom lens to the
wide-angle end. If you set the zoom lens to the telephoto end, the image
resolution will be affected and the autofocus might have problems.
The permissible range of camera installation angles with the wide-angle
converter mounted on the camera is ±15° from the horizontal.
The wide-angle converter cannot be used in night mode. ( P.33)
NOTE
VIDEO OUT A1
B1
A10
B10
DC IN 13V
To VIDEO IN terminal
Monitor
AC cable
Multiconnector plug
BNC connector
AC Adapter
(Rear of camera)
• PC
• Another
VC-C50i/
VC-C50iR
• Network
camera server
• Sensor
• Alarm
• Monitor