Filter
Top Products
14
E
Preparations
Powering the Camcorder
Before operating your camcorder, you will need to use the power adapter to:
provide power from a household power socket
or
charge a battery pack
Notes:
• The power adapter converts current from a household power socket (100–240 V AC, 50/60 Hz)
to the DC current used by your camcorder.
• If the adapter is used next to a TV, it may cause the TV to emit noise — move the adapter away
from the TV or the aerial cable.
Use the power adapter and the DC coupler to provide your camcorder with instant power from an
household power socket.
1. Connect the power cord to the power adapter.
2. Plug the adapter into a household power socket.
3. Connect the DC coupler to the power adapter.
4. Attach the DC coupler to the camcorder.
• Extend the viewfinder and rotate it upwards.
• Align the edge of the DC coupler with the line on the camcorder.
• Slide the coupler down in the direction of the arrow until it clicks into place.
5 After use, turn the camcorder off, detach the DC coupler and disconnect the DC
coupler from the power adapter. Unplug the power cord and disconnect it from
the power adapter.
•Press and hold the BATT. RELEASE button, while you slide the coupler up.
• Always turn the camcorder off and raise the viewfinder before removing the power source.
Using a Household Power Source
4
3
1
5
2