Filter
Top Products
18
Quick Start Basics
. Tilting the Monitor Screen
As shown in the figure below, pull upwards on the bottom center of the monitor
screen at point
A
. The monitor screen will open up to 90 degrees and stop
momentarily.
Keep lifting and it will tilt upwards up to 180 degrees.
• Do not pull downwards from the top of the monitor screen. Be sure to pull upwards
from the bottom of the monitor screen as shown in the figure.
IMPORTANT!
• Under factory default settings, the camera will turn on automatically whenever the
monitor screen is tilted. See page 167 for information about configuring the camera
so it does not turn on when the monitor screen is tilted upwards.
• When returning the monitor screen to the back of the camera, take care so you do
not catch your fingers between the top or bottom of the monitor screen and the
camera.
• Do not subject the monitor screen to strong impact. Doing so can damage it.
NOTE
• Be sure to return the monitor screen to its normal position behind the camera when
you are not using it.
• Whenever placing the camera on a tabletop or other surface to shoot, be sure to
pull out the stand to keep it from falling over (page 20).
A
OK NG