Filter
Top Products
23
Quick Start Basics
Back Lamp Operation
. To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (
1
,
2
).
• If the camera is on, press [ON/OFF] (Power) to turn it off before connecting it to
your computer.
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature,
USB-AC adaptor problem, or battery
problem (page 184)
Off Charging complete
Back lamp
USB
1
2
USB cable
(included with camera)
Making sure that the 6 mark on the camera is aligned with the 4 mark
of the USB cable connector, connect the cable to the camera.
[USB/AV] port
USB port
Computer
(power turned on)