Filter
Top Products
43
Snapshot Tutorial
2. Use [8] and [2] to select the setting you want to change, and then
press [SET].
This will select one of the Control Panel icons and display its settings.*
3. Use [8] and [2] to change the setting.
4. If you want to configure another setting,
repeat steps 2 and 3.
5. After all of the settings are the way you want,
press [SET].
This will apply the settings and return to the REC
mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 98).
Using the Control Panel
The Control Panel can be used to configure camera
settings.
1. In the REC mode, press [SET].
• You can also display the Control Panel by pressing
[2].
1
Self-timer (page 45)
2
White balance (page 46)
3
Focus (page 48)
4
ISO sensitivity (page 51)
5
Make-up Level (page 52)
6
EV shift (page 53)
7
Flash (page 54)
8
Metering (page 56)
* Items displayed in the Control Panel depend on the recording mode.
[SET]
[8] [2] [4] [6]
1
5
3
4
7
8
2
6
Control Panel