Casio EX-FC300S Camcorder User Manual


 
65
Snapshot Tutorial
5. Use [8], [2], [4], and [6] to reposition the currently selected icon.
6. Press [RING] to select the other icon if you want, and reposition it
using the same operation as step 5.
7. When the icons are located where you want, press [SET].
You can also use the function ring to reposition an icon.
NOTE
If you assign “Motion Position” to the “L/R Key” setting of the “r REC MENU”
(page 101), you will be able to reposition the selected icon with the [4] and [6]
keys while in the Handsfree Mode.
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. Align the mode dial with [h] (HDR).
2. Press [SET] and then use [8] and [2] to select the (HDR Level)
Control Panel option, and then press [SET].
3. Use [8] and [2] to select the HDR Level setting you want, and then
press [SET].
The HDR Level can be set to Level 1, Level 2, or Level 3.
You can also select the HDR Level by rotating the function ring.
4. Press the shutter button to shoot.
NOTE
HDR works best when shooting with the camera mounted on a tripod.
Shooting with this function causes the flash setting to change automatically to
?
(Flash Off).
Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
The desired HDR effect may not be attained if the camera or subject moves during
shooting.
Depending on shooting conditions and image composition, this function may not be
able to produce the desired result.
Digitally Correcting for Overexposure and Underexposure
(HDR)