CBC ZN-LN8048PHA Camcorder User Manual


 
v2.0 - English
28
Video
Model ZN-LN8048NHA ZN-LN8048PHA ZN-L8210PHA ZN-L8210NHA
System NTSC/EIA (Day/Night) PAL/ CCIR (Day/Night) PAL NTSC
Sensor 1/4" Interline Transfer CCD
Pixels 768(H) x 492(V) pixels 752(H) x 582(V) pixels 768(H) x 492(V) pixels
Scanning System 2:1 interlaced
Sync. System Internal
Scanning freq.
(H) : 15.734KHz
(V) :59.94Hz
(H) : 15.625KHz
(V) :50.00Hz
(H) : 15.734KHz
(V) :59.94Hz
Res. (H) 470 TVL 480 TVL 470 TVL
S/N ratio >50dB
Sensitivity < 0.09 lux (F1.6) @ 30 IRE (Night Mode) < 1.5 lux (F1.2) @ 50 IRE
Gamma 0.45
Video Output 1.0Vp-p / 75O, BNC
White Balance Auto Tracking
DC iris control
Elect. Shutter 1/60 sec. fixed
(1/100 sec. @ FL mode)
Elect. Shutter 1/50 sec. fixed
(1/120 sec. @ FL mode)
Elect. Shutter 1/60 sec fixed
(1/100 sec. @ FL mode)
AES
1/60 (1/100 sec. @ FL mode)
1/20,000 sec
1/50 (1/120 sec. @ FL mode) 1/20,000 sec
1/60 (1/100 sec. @ FLmode)
1/20,000 sec
Controls
Anti-Flicker On/Off, BLC On/Off,
Night-Mode On/Off
Anti-Flicker On/Off, BLC On/Off
Power
Voltage 12VDC
Power consumption 600mA max.
Dimensions
Dimensions (L) 180 x (W) 80.5 x (H) 59 mm
Operation Temp. 40° ~ 115°F (5° ~ 45°C)
Weight ~400 g (~0.9 lbs)
Lens
Model ZN-LN8048NHA ZN-LN8048PHA ZN-L8210PHA ZN-L8210NHA
Focal length 4 ~ 7.5 mm 2.8 ~ 10 mm
F-stop F:1.6-360 @ 2.8 mm: 1.2 / @ 10 mm: 2.1
Iris control DC
Network
Standard MPEG-4 (ISO/IEC 14496), M-JPEG
Bandwidth adjustable –4 Mbps max (MPEG-4)
Video Encoder 176 x 144 QCIF / 352 x 288 CIF / 704 x 288 2CIF
Audio Datarate: 80 kbps / Standard: G.711; 300 Hz – 3.4 KHz
Audio input 1 x mono, 1Vp-p, 50K Ohm
Audio Output 1 x mono, 1Vp-p, min 8 Ohm
Protocols RTP, RTCP, UDP, TCP, IP, HTTP, IGMP, ICMP, ARP, DHCP, *FTP, *SNMP
Software update Flash ROM, remote site programmable
Configuration using web browser (through built-in web server)
Alarm input 2x, max 24V, max load 10 Ohm
Relay 1x, max 40Vp-p, 0,8A
USB * 1 x memory local storage or Wireless LAN (IEEE 802.11) connection
Ethernet 10/100 Base-T, RJ45
* with future firmware update
TECHNICAL SPECIFICATIONS