Filter
Top Products
Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
Hanging Clamp
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the
fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
x When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
x Safety cables should always be used.
Note!
Clamp is sold separatel
x Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
y
.
4. OPERATING INSTRUCTIONS
1) Use the gobo speed knob to adjust the speed of the rotation of the gobo (turning the knob
clockwise increases the speed; counter-clockwise decreases the speed).
2) Use the gobo rotation switch to set the direction of rotation (up = clockwise rotation, middle = no
rotation, down = counter-clockwise rotation).
3) Turn the focusing lens to focus the beam onto your projection surface.
SX Gobo Manual 9
2006-12-11/15:16