Filter
Top Products
1-12
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 1 Installation
Switch Settings
Table 1-4 shows SW1 switch settings for Pelco P-Type control.
Note For Coaxitron controls, SW1 is not used; set all switches to OFF. For Pelco D-type control systems, see
Table 1-5 on page 1-13.
Pelco D or Pelco P Protocol Baud Rate
Switch Number 1 2 3 4 5 6 7 8 9 10
2400 Baud (Default for D-type Control) OFF OFF OFF
4800 Baud (Default for P-type Control) ON OFF OFF
9600 Baud OFF ON OFF
Video Cable Type
Switch Number 1 2 3 4 5 6 7 8 9 10
Coaxial Cable OFF
Dome Termination
Switch Number 1 2 3 4 5 6 7 8 9 10
Terminated ON
Not Terminated OFF
Table 1-3 Switch Settings for SW2 (continued)
Ta ble 1-4 Switch Settings for SW1, Pelco P-Type Control
Address
Switch Setting
SW1-1 SW1-2 SW1-3 SW1-4 SW1-5
1 OFF OFF OFF OFF OFF
2 ON OFF OFF OFF OFF
3 OFF ON OFF OFF OFF
4 ON ON OFF OFF OFF
5 OFF OFF ON OFF OFF
6 ON OFF ON OFF OFF
7 OFF ON ON OFF OFF
8 ON ON ON OFF OFF
9 OFF OFF OFF ON OFF
10 ON OFF OFF ON OFF
11 OFF ON OFF ON OFF
12 ON ON OFF ON OFF
13 OFF OFF ON ON OFF
14 ON OFF ON ON OFF
15 OFF ON ON ON OFF
16 ON ON ON ON OFF