Cisco Systems 2900 Security Camera User Manual


 
2-4
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 2 Operation
Live Video Page
Note If OSD is enabled, the PTZ function does not work on the camera.
Selecting a Stream
Step 1 Click the Select Stream button.
Step 2 Select one of the following stream options from the Select Stream page:
Primary Stream—To select this stream, click the button next to Primary Stream.
Secondary Stream—To select this stream, click the button next to Secondary Stream.
QuickView Stream—To select this stream, click the button next to QuickView Stream.
Event Stream—To select this stream, click the button next to Event Stream.
If the secondary stream has not been configured, only Primary Stream, Event Stream, and QuickView
Stream are available.
Step 3 Select one of the following options to adjust the stream settings:
MPEG-4 or H.264 compression—Select the video transmission type from the Transmission
drop-down menu. Available settings include Unicast and Multicast. Select the media player from the
Player drop-down menu. Available settings include Pelco Media Player or QuickTime.
Ta ble 2-2 PTZ Controls
Control Description
Zoom In: Click and hold the button to zoom the lens in
Zoom Out: Click and hold the button to zoom the lens out
Tilt Up: Click and hold the button to tilt the camera up
Tilt Down: Click and hold the button to tilt the camera down
Pan Left: Click and hold the button to pan the camera left
Pan Right: Click and hold the button to pan the camera right
Focus Near: Click and hold the button to focus on an object near the camera
Focus Far: Click and hold the button to focus on an object far away from the camera
Iris Close: Click and hold the button to close the iris and darken the image
Iris Open: Click and hold the button to open the iris and lighten the image