Filter
Top Products
2-5
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 2 Operation
Live Video Page
• JPEG compression—Select the image rate for the stream from the Image Rate drop-down menu.
The available settings for the primary and secondary streams depend on the Image Rate setting. The
QuickView Stream has only two image rate settings: 2 ips and 1 ips.
Step 4 Click the Select button to save the stream settings.
See the following sections for more information:
• Primary Stream and Secondary Stream, page 2-5
• QuickView Stream, page 2-5
• Unicast, page 2-5
• Multicast, page 2-6
• Compression Standards, page 2-26
• Image Rate and Bit Rate, page 2-26
Primary Stream and Secondary Stream
The primary stream and secondary stream are video streams that include compression, resolution, image
rate, and bit rate settings. The streams can be set up using a video preset setting, or they can be
customized using the video configuration settings.
A video preset is a predefined video configuration that offers a good balance between video performance
and bandwidth usage. For easy stream configuration, use the Video Preset page located in the drop-down
menu of the A/V Streams Tab.
To customize the Primary Stream or Secondary Stream use the Video Configuration page located in the
drop-down menu of the A/V Streams Tab. Configurable settings include the stream name, compression
standard, resolution setting, image rate, and bit rate. The default names for the streams are Primary
Stream and Secondary Stream; however, if these stream names have been changed, the new names will
replace the default names (Primary Stream and Secondary Stream) on the Select Stream page.
QuickView Stream
The QuickView stream is a predefined JPEG video stream with VGA resolution. This low resolution,
low frame rate stream is displayed when the Imaging Tab settings are configured. This allows users to
view changes to exposure, white balance, and tone map settings as they are configured and before the
settings are saved.
The QuickView Stream is also ideal for users who are connected to a network with processor bandwidth
limitations that might cause a high resolution, high frame rate video stream to pause or appear pixilated.
The aspect ratio of the QuickView Stream mirrors that of the Primary Stream. The only stream setting
that is selectable is the framerate: 2 ips or 1 ips.
Unicast
A unicast transmission sends a separate video stream to each user that is requesting data. Although
multiple users might request the same data from the camera at the same time, duplicate video streams
are transmitted to each user. Every unicast user that connects to the camera consumes additional
processing power, which limits the number of simultaneous users who can access the camera.
The camera supports a maximum of 20 simultaneous users.