Cisco Systems 2900 Security Camera User Manual


 
2-15
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 2 Operation
Network Tab
Enabling Secure Shell
Figure 2-2 SSH Settings Page
Step 1 Place your mouse pointer over the Network tab.
Step 2 Select SSH from the drop-down menu.
Step 3 Select the Enabled check box.
Note The username is always root and cannot be changed. The username and password are required
when accessing the camera through a third-party SSH client.
Step 4 Click in the Password box and type a password (4 to 16 alphanumeric characters). Passwords are
case-sensitive.
Step 5 Click in the Re-type Password box and retype your password.
Step 6 Click the Save button to save the password and enable SSH, or click the Reset button to clear all of the
information you entered without saving it.
Selecting SNMP Settings
Note The Simple Network Management Protocol (SNMP) settings are advanced controls. Consult your
network administrator to obtain the required information to configure SNMP settings.
Step 1 Place your mouse pointer over the Network tab.
Step 2 Select SNMP from the drop-down menu.
Step 3 Select the SNMP Version: None, V2c, or V3.
None disables the SNMP configuration and is the default setting.