2-16
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 2 Operation
Network Tab
Note SNMP V2c and SNMP V3 configuration settings are independent of each other, but only one
SNMP version can be active at a time.
Configuring SNMP V2c
Figure 2-3 SNMP V2c Settings
Step 1 Place your mouse pointer over the Network tab.
Step 2 Select V2c as the SNMP Version.
Step 3 Type the community name in the Community String box.
The default name for the Community String is “public.”
Step 4 Configure the Trap Configuration settings.
• Address—Type the hostname or IP address of the recipient of the trap message.
• Community String—Type the name of the community that should receive the trap message.
Step 5 Click the Save button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.