Filter
Top Products
2-42
Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
OL-24281-01
Chapter 2 Operation
Events Tab
Step 4 Select Timer from the Type drop-down menu.
Step 5 Click in the Frequency box and type a number. Select seconds, minutes, hours, or days from the
Frequency drop-down menu.
Step 6 Click the Submit button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.
Editing an Event Source
Step 1 Place your mouse pointer over the Events tab.
Step 2 Select Sources from the drop-down menu.
Step 3 Click the source profile that you want to delete from the defined source box located on the left side of
the page.
Step 4 Make any necessary changes to the available fields.
Step 5 Click the Submit button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.
Deleting an Event Source
Step 1 Place your mouse pointer over the Events tab.
Step 2 Select Sources from the drop-down menu.
Step 3 Click the source profile that you want to delete from the defined source box located on the left side of
the page.
Step 4 Click the Delete Source button. A dialog box appears with the message “Are you sure you want to delete
the source?”
Step 5 Click OK. The source profile is deleted from the defined source box.
Creating an Event Handler: Send Email
Note To use e-mail notification, the camera must be connected to a local area network (LAN) that maintains
an SMTP mail server. Consult your network administrator for information on configuring e-mail
notification on your local network.
Step 1 Configure the SMTP server to send e-mail.
Step 2 Place your mouse pointer over the Events tab.
Step 3 Select Handler from the drop-down menu.