Cisco Systems 4300E Security Camera User Manual


 
3-41
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 3 Configuring and Managing the IP Camera
Log Windows
INPUT_TWO_CHANGED Input port two changed to <high/low>. Input port 1 on the IP camera changed
state.
5
INPUT_TWO_RESET Input port two reset to <high/low>. Input port 1 on the IP camera reset to
its default state.
5
IP_CONFLICT IP Address conflict for <IP address>. IP camera experienced an IP address
conflict.
4
IR_FILTER_DAY_AUTO IR filter changed to day automatically. The IP camera enabled its day filter
automatically.
6
IR_FILTER_DAY_MANUAL IR filter manually changed to day by
user <user> <IP address or hostname>.
The IP camera day filter was enabled
by a user.
6
IR_FILTER_NIGHT_AUTO IR filter changed to night
automatically.
The IP camera enabled its night filter
automatically.
6
IR_FILTER_NIGHT_MANUAL IR filter changed to night by user
<user> <IP address or hostname>.
The IP camera night filter was enabled
by a user.
6
LOG_IN User <user> <IP address or hostname>
logged in to <web server or SSH
server>.
A user logged in to the IP camera. 5
LOG_OUT User <user> <IP address or hostname>
logged out of <web server or SSH
server>.
A user logged out of the IP camera. 5
MOTION_DETECTED Motion detected in region <region
index>.
The IP camera detected motion in its
video field.
5
MOTION_STOPPED Motion in region <region index>
stopped.
The IP camera stopped detecting
motion in its video field.
5
OUTPUT_ONE_RESET Output port one reset to <high/low>. Output port 1 on the IP camera reset to
its default state.
5
OUTPUT_ONE_TRIGGERED Output port one triggered to
<high/low>.
Output port 1 on the IP camera
changed state.
5
OUTPUT_TWO_RESET Output port two reset to <high/low>. Output port 2 on the IP camera reset to
its default state.
5
OUTPUT_TWO_TRIGGERED Output port two triggered to
<high/low>.
Output port 2 on the IP camera
changed state.
5
PAN Pan <left/right> by user <user>
<IP
address or hostname>.
The IP camera was panned by a user. 6
PATROL_START Patrol started by user <user> <IP
address or hostname>.
A patrol sequence was started by a
user.
6
PATROL_STOP Patrol stopped by user <user> <IP
address or hostname>.
A patrol sequence was stopped by a
user.
6
POWER_SUPPLY_FAILURE DC power supply failure. The DC power for the IP camera failed. 2
PTZ_LOST Connection to PTZ device was lost.
Device is either down or not
responding.
The pan/tilt device that the IP camera
is connected to is not responding.
4
Table 3-25 Log Messages
Message Name Description that Appears in Log File Explanation Severity