Cisco Systems 4500E Security Camera User Manual


 
3-15
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 3 Configuring and Managing the IP Camera
Feature Setup Windows
POP Server Identify an optional secondary POP server that is used for sending e-mail by
choosing IP Address or Hostname from the drop-down list and entering the
IP address or host name in the corresponding field.
This field is dimmed if you do not choose Requires POP Before SMTP in
the Authentication field that follows.
Authentication If the secondary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type from the drop-down list. The
authentication type typically is the same as that for the POP3 server that you
use to receive e-mail.
Account Name If the secondary SMTP server requires authentication, enter the account
name for the server.
Password If the secondary SMTP server requires authentication, enter the account
password for the server.
Send To Enter an e-mail address to which an e-mail message is sent when an event
occurs.
Show From Address As Enter the e-mail address to be shown in the From field for the e-mail message
that is sent when an event occurs.
Subject Enter the text to be shown in the Subject field for the e-mail messages that
the IP camera sends when events occur. The subject can contain up to 118
characters, including spaces.
Attach Video Streaming
URL Address
Check this check box to include in the e-mail message body the URL from
which the recipient can access the live video stream from the camera on
which the event was detected.
Attach Snapshot Check this check box to include with the e-mail message a still picture from
the beginning of the event. This snapshot is stored on the IP camera until the
message is sent.
This functionality is available only when the secondary video stream is
enabled.
Attach Video Clip Check this check box and enter the following values to include with the
e-mail message a video clip of the event:
Pre-Capture Length—Enter the amount of video (in seconds) before
the event to include in the video clip.
Post-Capture Length—Enter the amount of video (in seconds) after the
event to include in the video clip.
This video clip is stored on the IP camera until the message is sent.
FTP Notification Area
Primary FTP Server Identify the primary FTP server to which snapshots or video clips are
uploaded by choosing IP Address or Hostname from the drop-down list and
entering the IP address or host name in the corresponding field.
Primary FTP Port Enter the port number that receives messages on the primary FTP server. The
default FTP port number is 21.
User Name Enter the primary FTP server login user name.
Table 3-7 Event Notification Window Options (continued)
Option Description