Filter
Top Products
2-6
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
OL-22669-02
Chapter 2 Installation
Surface Installation
Figure 2-6 Positioning the Camera
Step 7 Focus the lens:
a. View the camera image using the service jack or a Web browser.
b. Press the auto back focus button once to center the focus mechanism. The button is located on the
rim of the back box.
c. Manually adjust the zoom and focus of the lens to the desired field of view (refer to the instructions
shipped with the lens).
d. Press and hold the back focus button for three seconds to start the auto back focus mechanism.
Step 8 Install the dome liner and lower dome (refer to “Dome Liner and Lower Dome Installation” section on
page 2-7).
1 Pan 368° 3 Rotate 355°
2 Tab lock 4 Tilt 160°
279055
1
2
3
4