Cisco Systems 5010 Security Camera User Manual


 
3-27
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
OL-22669-02
Chapter 3 Operation
A/V Streams Tab
Configuring a Custom Video Stream Configuration
Figure 3-13 Custom Video Stream Configuration Page
Step 1 Place your mouse pointer over the A/V Streams tab.
Step 2 Select Video Configuration from the drop-down menu.
Step 3 Click both of the Clear buttons to delete the primary and secondary streams settings.
Step 4 Optional: In the Primary Stream section, type a user-friendly name in the Name box (2 to 64 characters).
A user-friendly name makes it easier to recognize the stream (for example, Live and Recording).
Step 5 Configure the Compression Standard, Resolution, Image Rate, and Bit Rate settings for the primary
stream.
Note The compression standard, resolution, image rate, and bit rate settings are dependent on each
other. You must first decide the priority setting before you configure a stream. For example, if
you want an image rate of 30 ips, set the image rate before you configure the other settings.
Step 6 Repeat steps 3 through 5 for the Secondary stream.
Step 7 Click the Save button to save the settings, or click the Reset button to clear all of the information you
entered without saving it.