Filter
Top Products
3-28
Cisco Video Surveillance 2600 IP Camera User Guide
OL-24127-02
Chapter 3 Configuring and Managing the IP Camera
Applications Windows
To display the Mail & FTP window, access the configuration windows as described in the “Accessing
the IP Camera Windows” section on page 2-6, click Applications, then click Mail & FTP.
If you change any options in the Mail & FTP window, you must click Save to save the changes. To
discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the
window. You may need to scroll down to see them.
Table 3-15 describes the options in the Mail & FTP window.
Ta b l e 3-15 Mail & FTP Window Options
Option Description
Primary SMTP Server
Primary SMTP Check this check box to cause e-mail messages to be sent to the primary
Simple Mail Transport Protocol (SMTP) server.
SMTP Mail Server Enter the name or IP address of the primary SMTP server.
If you enter a name, you must configure the Primary DNS option as
described in the
“Basic Setup Window” section on page 3-5.
Authentication If the primary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
Account Name If the primary SMTP server requires authentication, enter the account name
for the server.
Password If the primary SMTP server requires authentication, enter the account
password for the server.
POP Server Name Enter the name of the POP3 mail server that you use to receive e-mail.
Secondary SMTP Server
Secondary SMTP Check this check box to cause e-mail messages to be sent to a secondary
(backup) SMTP server if the primary SMTP server is unavailable.
SMTP Mail Server Enter the IP address of the secondary SMTP server.
Authentication If the secondary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
Account Name If the secondary SMTP server requires authentication, enter the account
name for the server.
Password If the secondary SMTP server requires authentication, enter the account
password for the server.
POP Server Name Enter the name of the POP3 mail server that you use to receive e-mail.
E-Mail Setup
Send To Enter at least 1 e-mail address to which e-mail messages are sent when an
event occurs. The second and third addresses are optional.
Show “From” as Enter the e-mail address to be shown in the From field for e-mail messages
that are sent when an event occurs.
Subject Enter the text to be shown in the Subject field for the e-mail messages that
the IP camera sends when events occur. The subject can contain up to 48
characters, including spaces.