Filter
Top Products
2-10
Cisco Video Surveillance System 2621 IP Dome User Guide
OL-24129-02
Chapter 2 Getting Started
Installing the Cisco Video Surveillance 2621 IP Dome
To mount the IP camera with a conduit base, perform the following steps:
Note When you disassemble the IP dome for mounting as described in these steps, make sure to remove any
protective packing material that is installed between components.
Procedure
Step 1 Remove the dome assembly by unscrewing the three security TORX screws and pulling the dome away
from the base plate (see
Figure 2-3).
Use the TORX screwdriver that is provided with the IP dome to unscrew these screws.
Figure 2-6 Disassembling the 2621 IP Dome Components
1 Base plate
2 Camera unit
3 Camera unit screws (2)
2
1
3
4
5
6