Filter
Top Products
2-20
Cisco Video Surveillance System 2621 IP Dome User Guide
OL-24129-02
Chapter 2 Getting Started
Installing the Cisco Video Surveillance 2621 IP Dome
Figure 2-13 Securing TORX Screws
Mounting on a Solid Surface
If the cables for the IP dome can pass through an opening in the surface, you can mount the IP dome by
attaching the base plate directly to the surface. To do so, perform the following steps.
Note When you disassemble the IP dome for mounting as described in these steps, make sure to remove any
protective packing material that is installed between components.
Procedure
Step 1 Remove the dome assembly by unscrewing the three security TORX screws and pulling the dome away
from the base plate (see
Figure 2-14).
Use the TORX screwdriver that is provided with the IP dome to unscrew these screws.