Filter
Top Products
48-2
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 48 Configuring Device Access Settings on Firewall Devices
HTTP Page
HTTP Page
Use the table on the HTTP page to manage the interfaces configured to access the HTTP server on a
device, as well as HTTP redirect to HTTPS on those interfaces. You also can enable or disable the HTTP
server on the device from this page. Administrative access by the specific device manager requires
HTTPS access.
Note To redirect HTTP, the interface requires an access list that permits HTTP. Otherwise, the interface cannot
listen to port 80, or to any other port that you configure for HTTP.
Navigation Path
• (Device view) Select Platform > Device Admin > Device Access > HTTP from the Device Policy
selector.
• (Policy view) Select PIX/ASA/FWSM Platform > Device Admin > Device Access > HTTP from
the Policy Type selector. Select an existing policy from the Shared Policy selector, or create a new
one.
Field Reference
HTTP Configuration Dialog Box
Use the HTTP Configuration dialog box to add or edit a host or network that will be allowed to access
the HTTP server on the device via a specific interface; you also can enable and disable HTTP redirect.
Navigation Path
You can access the HTTP Configuration dialog box from the HTTP Page, page 48-2.
Field Reference
Table 48-1 HTTP Page
Element Description
HTTP Interface table Use the Add Row, Edit Row, and Delete Row buttons below this table
to manage device interfaces on which HTTP-to-HTTPS redirect is
configured. Add Row and Edit Row open the HTTP Configuration
Dialog Box, page 48-2.
Enable HTTP Server Enables or disables the HTTP server on the device. When enabled, you
can specify a communications Port for the server. The Port range is 1
to 65535; the default is 443.
Table 48-2 HTTP Configuration Dialog Box
Element Description
Interface Name Enter or Select the interface on which access to the HTTP server on the
device is allowed.