Filter
Top Products
48-12
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 48 Configuring Device Access Settings on Firewall Devices
Configuring SNMP
Add SNMP Host Access Entry Dialog Box
Use the Add SNMP Host Access Entry dialog box to add and edit entries in the SNMP Hosts table on
the SNMP page. These entries represent SNMP management stations allowed to access the security
device.
Navigation Path
You can access the Add SNMP Host Access Entry dialog box from the SNMP Page, page 48-8.
Related Topics
• Configuring SNMP, page 48-7
• SNMP Trap Configuration Dialog Box, page 48-9
Other
• IPSec Start – IPsec has started, as indicated in the notification.
• IPSec Stop – IPsec has stopped, as indicated in the notification.
• IKEv2 Start – Internet Key Exchange version 2 (IKEv2) exchange
initiated.
• IKEv2 Stop – Internet Key Exchange version 2 (IKEv2) exchange
terminated.
• Memory Threshold – Available free memory has fallen below
configured threshold, as indicated in the notification.
• Remote Access Session Threshold Exceeded – The number of
remote access sessions has reach the defined limit, as indicated in
the notification.
• CPU Rising Threshold – This notification is triggered when
utilization of CPU resources exceeds the specified Percentage for
a specified Period of time:
Percentage – Enter the desired upper limit of CPU resource usage
as a percentage of total available. Value values range from 10 to 94;
default is 70%.
Period – Specify the length of time, in minutes, that the specified
Percentage can be exceeded before notification is triggered. Value
values range from 1 to 60.
• Interface Threshold – This notification is triggered when
utilization of a physical interface exceeds the specified Percentage
of total bandwidth:
Percentage – Enter the desired upper limit on interface usage as a
percentage of total available bandwidth. Value values range from
30 to 99; default is 70%.
• NAT Packet Discard – This notification is generated when IP
packets are discarded by the NAT function. Available Network
Address Translation addresses or ports have fallen below
configured threshold.
Table 48-8 SNMP Trap Configuration Dialog Box (Continued)
Element Description