Filter
Top Products
48-14
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 48 Configuring Device Access Settings on Firewall Devices
Telnet Page
Related Topics
• Telnet Configuration Dialog Box, page 48-14
Field Reference
Telnet Configuration Dialog Box
Use the Telnet Configuration dialog box to configure Telnet options for an interface.
Navigation Path
You can access the Telnet Configuration dialog box from the Telnet Page, page 48-13.
Field Reference
Table 48- 10 Telne t Page
Element Description
Timeout Number of minutes a Telnet session can remain idle before the firewall
device closes it. Values can range from 1 to 1440 minutes.
Telnet Access Table
Interface Interface that receives Telnet packets from the client.
IP Addresses The IP address and network mask of each host or network that can
access the Telnet console through the specified interface.
Table 48-11 Telnet Configuration Dialog Box
Element Description
Interface Name Enter or Select an interface that can receive Telnet packets from a
client.
IP Addresses/Netmask Enter or Select the IP address and netmask, separated by a “/”, of each
host or network permitted to access the firewall device’s Telnet console
through the specified interface. Use commas to separate multiple
entries.
Note To limit access to a single IP address, use 255.255.255.255 or
32 as the netmask. Do not use the subnetwork mask of the
internal network.