Filter
Top Products
53-6
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 53 Configuring Multicast Policies on Firewall Devices
Configuring IGMP
IGMP Page - Static Group Tab
Use the Static Group tab to statically assign a multicast group to an interface.
Navigation Path
You can access the Static Group tab from the IGMP page. For more information about the IGMP page,
see Configuring IGMP, page 53-2.
Related Topics
• Enabling PIM and IGMP, page 53-1
• Configuring Multicast Routes, page 53-8
• Configuring PIM, page 53-11
Field Reference
Configure IGMP Static Group Parameters Dialog Box
Use the Configure IGMP Static Group Parameters dialog box to statically assign a multicast group to an
interface or to change existing static group assignments.
Navigation Path
You can access the Configure IGMP Static Group Parameters dialog box from the IGMP Page - Static
Group tab. For more information, see IGMP Page - Static Group Tab, page 53-6.
Related Topics
• IGMP Page - Static Group Tab, page 53-6
• Configuring IGMP, page 53-2
Multicast Group Network Enter or Select the multicast group address(es) assigned to the specified
interface. You can provide one or more IP address/netmask entries, one
or more Networks/Hosts objects, or a combination of both; separate the
entries with commas.
Group network addresses can range from 224.0.0.0 to 239.255.255.255.
Action Choose permit if the multicast group is permitted on the interface.
Choose deny if the multicast group is not permitted.
Table 53-3 Configure IGMP Access Group Parameters Dialog Box (Continued)
Element Description
Table 53-4 Static Group Tab
Element Description
Interface The name of the interface with which the static group is associated.
Multicast Group Address The multicast group address to which this rule applies.